I

I (UP19980820 ) IC, NODE, Lab, VALUE, VALUE2, NEND, NINC

Specifies initial conditions at nodes.

SOLUTION:MiscLoads

	Mp Me St -- LP Th E3 E2 FL PP ED
NODE

Lab

VALUE

VALUE2

NEND, NINC

Notes

Menu Paths

Main Menu >Preprocessor >Loads >Apply >Initial Condit'n >Define

Main Menu >Solution >Apply >Initial Condit'n >Define

ICDELE

Deletes initial conditions at nodes.

SOLUTION:MiscLoads

	Mp Me St -- LP Th E3 E2 FL PP ED
Notes

Menu Paths

Main Menu >Preprocessor >Loads >Delete >Initial Condit'n

Main Menu >Solution >Delete >Initial Condit'n

ICLIST, NODE1, NODE2, NINC, Lab

Lists the initial conditions.

SOLUTION:MiscLoads

	Mp Me St -- LP Th E3 E2 FL PP ED
NODE1, NODE2, NINC

Lab

Notes

Menu Paths

Main Menu >Preprocessor >Loads >Apply >Initial Condit'n >List Picked

Main Menu >Solution >Apply >Initial Condit'n >List Picked

Utility Menu >List >Loads >Initial Conditions >On Picked Nodes

*IF, VAL1, Oper, VAL2, Base

Conditionally causes commands to be read.

APDL:ProcessControls

	Mp Me St DY LP Th E3 E2 FL PP ED
VAL1

Oper

VAL2

Base

Default: Read commands sequentially.

Notes

Menu Paths

This command cannot be accessed directly in the menu.

IGESIN, Fname, Ext, Dir

Transfers IGES data from a file into ANSYS.

AUX15:IGES

	Mp Me St DY LP Th E3 E2 FL PP ED
Fname

Ext

Dir

Notes

Menu Paths

Utility Menu >File >Import

IGESOUT, Fname, Ext, Dir, ATT

Writes solid model data to a file in IGES Version 5.1 format.

PREP7:Database

	Mp Me St DY LP Th E3 E2 FL PP --
Fname

Ext

Dir

ATT

Notes

Menu Paths

Utility Menu >File >Export

IMAGIN, IR, IA, -, -, Name, -, -, FACTA

Forms an imaginary variable from a complex variable.

POST26:Operations

	Mp Me St DY LP -- E3 E2 -- PP ED
IR

IA

-, -

Name

-, -

FACTA

Notes

Menu Paths

Main Menu >TimeHist Postpro >Math Operations >Imaginary Part

IMMED, KEY

Allows immediate display of a model as it is generated.

GRAPHICS:SetUp

	Mp Me St DY LP Th E3 E2 FL PP ED
KEY

Default: As described above.

Notes

Menu Paths

Utility Menu >PlotCtrls >Erase Options >Immediate Display

IMPD, Vpath, Ipath, Vsymm, Isymm

Calculates the impedance of a conductor at a reference plane.

POST1:Magnetics

	Mp Me -- -- -- -- E3 -- -- PP ED
Vpath

Ipath

Vsymm

Isymm

Notes

Menu Paths

Main Menu >General Postproc >Elec&Mag Calc >Impedance

/INPUT, Fname, Ext, Dir, LINE, LOG

Switches the input file for the commands that follow.

SESSION:RunControls

	Mp Me St DY LP Th E3 E2 FL PP ED
Fname

Ext

Dir

LINE

LOG

Notes

Menu Paths

Utility Menu >File >Read Input from

INRES, Item1, Item2, Item3, Item4, Item5, Item6, Item7, Item8

Identifies the data to be retrieved from the results file.

POST1:Controls

	Mp Me St DY LP Th E3 E2 FL PP ED
Item1, Item2, Item3, Item4, Item5, Item6, Item7, Item8

Notes

Menu Paths

Main Menu >General Postproc >Data & File Opts

INRTIA

Specifies "Inertial loads" as the subsequent status topic.

SOLUTION:Status

	Mp Me St DY LP Th E3 E2 FL PP ED
Notes

Menu Paths

This command cannot be accessed directly in the menu.

INT1, IR, IY, IX, -, Name, -, -, FACTA, FACTB, CONST

Integrates a variable.

POST26:Operations

	Mp Me St DY LP Th E3 E2 FL PP ED
IR

IY, IX

-

Name

-, -

FACTA, FACTB

CONST

Notes

IR = (FACTA x IY) d(FACTB x IX) + CONST

Menu Paths

Main Menu >TimeHist Postpro >Math Operations >Integrate

INTSRF, Lab

Integrates nodal results on an exterior surface.

POST1:SpecialPurpose

	Mp Me St DY -- -- -- -- FL PP ED
Lab

Notes

Menu Paths

Main Menu >General Postproc >Nodal Calcs >Pressure Integrl

IOPTN, Lab, VAL1, VAL2

Controls options relating to importing a model.

AUX15:IGES

	Mp Me St DY LP Th E3 E2 FL PP ED
Lab

VAL1, VAL2

Default: Merging will be performed during the IGES transfer with no global solid model tolerance (GTOLER) used.

Notes

Menu Paths

Utility Menu >File >Import

IRLF, KEY

Specifies that inertia relief calculations are to be performed.

SOLUTION:Inertia

	Mp Me St -- LP -- -- -- -- PP ED
KEY

Default: No inertia relief calculations.

Notes

Menu Paths

Main Menu >Preprocessor >Loads >Other >Inertia Relief

Main Menu >Preprocessor >Loads >Output Ctrls >Incl Mass Summry

Main Menu >Solution >Other >Inertia Relief

Main Menu >Solution >Output Ctrls >Incl Mass Summry

IRLIST

Prints inertia relief summary table.

POST1:Listing

	Mp Me St DY LP -- -- -- -- PP ED
Notes

Menu Paths

This command cannot be accessed directly in the menu.